The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118723 is the custom fit for 2017 and 2018 Chrysler Pacifica Touring and LX models. The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118712 is the fit for 2017 and 2018 Chrysler Pacifica (excluding hybrid), Touring L Plus, Touring L, and Limited models. The connectors are different based on the trim models but it appears the modulite is the same amperage. view full answer...
There is a pretty big difference between the Curt, part # C12120 and Draw-Tite part # 36541 trailer hitch installation.
I have attached links to the installation for both of these hitches you can check out. For the Curt hitch trimming of the heat shields is required when installing.
For the Draw-Tite the fascia is removed and also trimmed. With the trimming of the fascia, less of the hitch will be visible, and that is more appealing to many customers.
It is really a matter of aesthetics... view full answer...
The two front-mount hitch receivers offered for your 2013 Nissan Titan 4WD, Curt # C31061 and Draw-Tite # 65065, share common weight ratings but differ in their installation requirements. The Draw-Tite hitch does not require frame drilling as the Curt does but may require front fascia trimming to create a space for the cross tube. This will depend on the exact features on the vehicle.
The install instructions for both hitches are linked for your review. I checked through both and neither... view full answer...
Of the 2 Curt receivers available for your 2022 Chevrolet Equinox, I recommend the Receiver # C77FR as the better choice. It has a class III, 2" receiver which has a lot more options available to fit when you are looking at hitch mounted accessories. The tongue weight capacity of the receiver is 675lbs and the maximum trailer weight capacity is 4,500lbs. Be sure to not exceed the weight capacities for your particular Equinox given from Chevrolet.
The Receiver # C98CR is almost identical... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver part # DT84MR and etrailer Trailer Hitch Receiver part # e75ZR are both fits for a 2023 Toyota Highlander Platinum. There is trimming required of underbody panels for both models, but not really the actual bumper. I have attached photo of this below, the first is of the Draw-Tite and the second is of the etrailer. It's pretty minor for either so not a big deal and it's required for all hitch options on this vehicle.
The main difference between... view full answer...
We do indeed have a video showing the Curt, Hidden Hitch and Draw-Tite hitches being installed on 2014 and 2015 Kia Sorento models, however the Hidden Hitch Receiver has been discontinued by the manufacturer. I've attached the videos.
The Curt # C13152 is designed to fit around the muffler on the passenger side by mounting to the inside and bottom of the frame member. The Draw-Tite model passes over the muffler on the passenger side and attach to the outboard and underside of the frame... view full answer...
The biggest difference between the trailer hitch options for a 2022 Lincoln Corsair is installations, the etrailer part # e89YR and Curt part # C23FR will be much easier to install than the Draw-Tite part # DT95MR. The Draw-Tite requires the exhaust to be lowered, the heat shield to be trimmed, and the rear bumper fascia to be trimmed. The etrailer and Curt do not require any of the above so they are what I recommend. The only difference between the etrailer and Curt is their finish, the... view full answer...
First one reason there are so many kits for your 2021 Chevrolet Silverado is due to the Trail Boss coming with a suspension lift right from the factory. So half the available kits can only be used on the Trail Boss trim level.
There are going to be 2 kits that are available. First is the kit I always recommend using the Air Lift LoadLifter 5000 Ultimate. These air bags have internal jounce bumpers which help reduce bounce that you may get from the additional load. The bumpers also help... view full answer...
The installion instructions for the Draw-Tite Front Mount Trailer Hitch Receiver part # 65049 do not require that the front lower bumper spoiler be removed therefore yes, I believe you can leave it in position while you install the trailer hitch. The process of removing the front lower bumper spoiler was done to give our viewers a better look at what was going on which is why it was removed in the video.
Please note that if you don't want to do any trimming of the front lower bumper spoiler... view full answer...
The difference between the Curt Hitch - 2" # C22UR and the Draw-Tite - 2" # DT55MR for your 2021 Toyota Sienna is the weight capacity. While the Curt offers 350 pounds of maximum tongue weight/3,500 pounds of maximum gross towing weight, the Draw-Tite offers 675 pounds of maximum tongue weight/4,500 pounds maximum gross towing weight. Another difference is that the Curt is manufactured in the U.S.A. while some of the components of the Draw-Tite are made in Mexico.
As far as similarities,... view full answer...
Draw-Tite #75673 has 7 inch distance between the receiver hitch pin hole and the furthest rearward portion of the rear bumper when installed on a 2011 model Subaru Outback Wagon.
Although the hitch will attach to the vehicle using existing holes in the frame, a 1-1/8 inch hole saw will be needed to drill an access hole in the frame member on both the driver and passenger side. This hole is necessary in order to feed installation hardware into the frame as shown in the install instructions... view full answer...
The Draw-Tite Class III Max Frame Receiver Hitch part # 76023 and the Curt Class III Receiver Hitch part # C13418 are both excellent options for a 2019 Chevrolet Blazer. I recommend going with the Curt Class III Receiver Hitch because it will be much easier to install than the Draw-Tite Class III Max Frame Receiver Hitch. The Draw-Tite Class III Max Frame Receiver Hitch requires that you remove the rear bumper fascia whereas the Curt Class III Receiver Hitch just requires that you lower... view full answer...
You are correct in that both the T-One Vehicle Wiring Harness part # 118755 (no longer available) and the T-Connector Vehicle Wiring Harness part # C56372 are a fit for your 2017 Chevrolet Sonic RS/LT Hatchback. There are few differences between them as they both plug in behind the tail lights without any cutting or splicing involved. They are essentially just two different manufacturers version of the same product. They both have the same purpose and will plug into the same connector on... view full answer...
The Curt Trailer Hitch Receiver part # CU64FR and the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76182 will have a concealed look therefore only the receiver tube opening will be shown once installed. In regards to the heat shield, this must be trimmed with either option because they install in the same spot on the frame. I have attached a photo that shows how much you will need to trim but this is a very minor alternation and not anything you should be worried about as it will have... view full answer...
There are only some minor differences between the two trailer hitch receivers for your 2022 Kia Carnival, which are the following part numbers:
- Draw-Tite Max-Frame Trailer Hitch Receiver # DT34GR
- Curt Trailer Hitch Receiver # C67ER
One of those minor differences is the install, in which the Curt has you trim and reinstall the trim panel that is underneath your Carnival, while you'll leave it off completely for the Draw-Tite. However, you do not have to reinstall the panel with the... view full answer...
The Curt # CU94FR vehicle wiring harness plugs into the same factory connector located under your 2022 Hyundai Palisade and will have a 4-way flat connector. This connector will allow for you to connect to most small trailers as well as use Auxiliary Lights # C53201 with your hitch mounted accessories that impair the view of your tail lights to other drivers.
If you are still in need of a receiver I recommend the etrailer Trailer Hitch Receiver # e95ZR. I find that the matte black finish... view full answer...
I recommend the Curt # C13186. This hitch will give you the hidden look you mentioned while maintaining a 3,500 pound gross towing capacity. You will want to check your owner's manual for the towing capacity of your vehicle. The towing capacity can range from 1,500 - 3,500 pounds depending on your engine size and equipment.
This trailer hitch has a Class III rating, a 2 x 2 inch hitch receiver, and a maximum tongue weight of 350 pounds. This hitch sits primarily under the vehicle, so... view full answer...
Many trailer wiring harnesses are vehicle specific so I would need to know the year, make, model, and trim level of the vehicle to recommend the best wiring harness. The Curt hitch you referenced, # 11479 is designed to fit a 2008 Mitsubishi Lancer except the Evolution and 2009 to 2012 Mitsubishi Lancer except Evolution, Ralliart, and Dual Exhaust models.
For a 2008 to 2011, we only have the # 119178KIT available.
For a 2012 you can use the # C56127. In this case the Curt harness, # C56127,... view full answer...
The Roadmaster EZ4 Base Plate Kit, # RM-521448-4, will fit a 2010 Jeep Wrangler without aftermarket bumpers, winch, or guards. There is some trimming needed on the factory rock guard underneath the front bumper.
The Roadmaster EZ4 Base Plate Kit, # RM-521448-4, is for the 2007 to 2009 Jeep Wrangler and Wrangler Unlimited. It will not fit the 2010 Jeep Wrangler.
The Roadmaster EZ4 series base plates are our most popular base plates. They will fit all the Roadmaster tow bars and they have... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13397 is the same as the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"# e98848 regarding measurements and rated capacities. The only difference is the powder coat finish. The Curt hitch has a gloss black finish where the etrailer hitch has a matte black finish. It really comes down to your preference but many people like the matte black because it draws less attention to the receiver... view full answer...
Go To Results